/* USER CODE BEGIN Header */
/**
 ******************************************************************************
 * @file           : main.c
 * @brief          : Main program body
 ******************************************************************************
 * @attention
 *
 * Copyright (c) 2025 STMicroelectronics.
 * All rights reserved.
 *
 * This software is licensed under terms that can be found in the LICENSE file
 * in the root directory of this software component.
 * If no LICENSE file comes with this software, it is provided AS-IS.
 *
 ******************************************************************************
 */
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "main.h"

/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */
#include <stdio.h>
#include <string.h>
#include <stdbool.h>

/* USER CODE END Includes */

/* Private typedef -----------------------------------------------------------*/
/* USER CODE BEGIN PTD */

/* USER CODE END PTD */

/* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN PD */

/* USER CODE END PD */

/* Private macro -------------------------------------------------------------*/
/* USER CODE BEGIN PM */

/* USER CODE END PM */

/* Private variables ---------------------------------------------------------*/
UART_HandleTypeDef huart1;
UART_HandleTypeDef huart2;

/* USER CODE BEGIN PV */
static uint8_t rx_buf[64];
static bool rx_complete = false;
static volatile uint16_t rx_length = 0;
/* USER CODE END PV */

/* Private function prototypes -----------------------------------------------*/
void SystemClock_Config(void);
static void MX_GPIO_Init(void);
static void MX_USART1_UART_Init(void);
static void MX_USART2_UART_Init(void);
/* USER CODE BEGIN PFP */
static void hex_dump(const uint8_t *data, uint16_t len);
/* USER CODE END PFP */

/* Private user code ---------------------------------------------------------*/
/* USER CODE BEGIN 0 */
static char heartbeat_buf[64];

/**
  * @brief  Print hex dump in ESP-IDF style
  * @param  data: pointer to data buffer
  * @param  len: length of data
  * @retval None
  */
static void hex_dump(const uint8_t *data, uint16_t len)
{
	char line_buf[80];
	
	for (uint16_t i = 0; i < len; i += 16) {
		// Print address
		int pos = snprintf(line_buf, sizeof(line_buf), "0x%08lx   ", (unsigned long)(data + i));
		
		// Print hex values (first 8 bytes)
		for (int j = 0; j < 8; j++) {
			if (i + j < len) {
				pos += snprintf(line_buf + pos, sizeof(line_buf) - pos, "%02x ", data[i + j]);
			} else {
				pos += snprintf(line_buf + pos, sizeof(line_buf) - pos, "   ");
			}
		}
		
		// Space between two groups
		pos += snprintf(line_buf + pos, sizeof(line_buf) - pos, " ");
		
		// Print hex values (second 8 bytes)
		for (int j = 8; j < 16; j++) {
			if (i + j < len) {
				pos += snprintf(line_buf + pos, sizeof(line_buf) - pos, "%02x ", data[i + j]);
			} else {
				pos += snprintf(line_buf + pos, sizeof(line_buf) - pos, "   ");
			}
		}
		
		// Print ASCII representation
		pos += snprintf(line_buf + pos, sizeof(line_buf) - pos, " |");
		for (int j = 0; j < 16 && (i + j) < len; j++) {
			uint8_t c = data[i + j];
			if (c >= 32 && c <= 126) {
				pos += snprintf(line_buf + pos, sizeof(line_buf) - pos, "%c", c);
			} else {
				pos += snprintf(line_buf + pos, sizeof(line_buf) - pos, ".");
			}
		}
		pos += snprintf(line_buf + pos, sizeof(line_buf) - pos, "|\r\n");
		
		// Send line to UART1
		HAL_UART_Transmit(&huart1, (uint8_t *)line_buf, (uint16_t)pos, HAL_MAX_DELAY);
	}
}

/* USER CODE END 0 */

/**
  * @brief  The application entry point.
  * @retval int
  */
int main(void)
{

  /* USER CODE BEGIN 1 */

  /* USER CODE END 1 */

  /* MCU Configuration--------------------------------------------------------*/

  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
  HAL_Init();

  /* USER CODE BEGIN Init */

  /* USER CODE END Init */

  /* Configure the system clock */
  SystemClock_Config();

  /* USER CODE BEGIN SysInit */

  /* USER CODE END SysInit */

  /* Initialize all configured peripherals */
  MX_GPIO_Init();
  MX_USART1_UART_Init();
  MX_USART2_UART_Init();
  /* USER CODE BEGIN 2 */
  /* Enable UART IDLE interrupt */
  __HAL_UART_ENABLE_IT(&huart2, UART_IT_IDLE);
  /* Start UART2 reception in interrupt mode */
  HAL_UART_Receive_IT(&huart2, rx_buf, sizeof(rx_buf));
  /* USER CODE END 2 */

  /* Infinite loop */
  /* USER CODE BEGIN WHILE */
	while (1) {
		static uint32_t last_toggle_timestamp;
		if (HAL_GetTick() - last_toggle_timestamp >= 1000) {
			HAL_GPIO_TogglePin(GPIOB, GPIO_PIN_6);
			/* Heartbeat: emit tick timestamp over UART1 and blink the PB6 LED */
			int msg_len = snprintf(heartbeat_buf, sizeof(heartbeat_buf),
									"PB6 heartbeat %lu\r\n", (unsigned long)HAL_GetTick());
			if (msg_len > 0) {
				if (msg_len >= (int)sizeof(heartbeat_buf)) {
					msg_len = (int)sizeof(heartbeat_buf) - 1;
				}
				HAL_UART_Transmit(&huart1, (uint8_t *)heartbeat_buf, (uint16_t)msg_len,
									HAL_MAX_DELAY);
			}
			last_toggle_timestamp = HAL_GetTick();
		}
		
		/* Check if data received from UART2 */
		if (rx_complete) {
			rx_complete = false;
			uint16_t len = rx_length;
			
			/* Print header */
			char header[32];
			int header_len = snprintf(header, sizeof(header), "RX[%u]:\r\n", len);
			HAL_UART_Transmit(&huart1, (uint8_t *)header, (uint16_t)header_len, HAL_MAX_DELAY);
			
			/* Print received buffer as hex dump */
			hex_dump(rx_buf, len);
			
			/* Clear buffer before re-arming */
			memset(rx_buf, 0, sizeof(rx_buf));
			
			/* Re-arm UART2 reception */
			HAL_UART_Receive_IT(&huart2, rx_buf, sizeof(rx_buf));
		}
    /* USER CODE END WHILE */
    /* USER CODE BEGIN 3 */
	}
  /* USER CODE END 3 */
}

/**
  * @brief System Clock Configuration
  * @retval None
  */
void SystemClock_Config(void)
{
  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};

  /** Configure the main internal regulator output voltage
  */
  __HAL_RCC_PWR_CLK_ENABLE();
  __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);

  /** Initializes the RCC Oscillators according to the specified parameters
  * in the RCC_OscInitTypeDef structure.
  */
  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
  RCC_OscInitStruct.PLL.PLLM = 8;
  RCC_OscInitStruct.PLL.PLLN = 192;
  RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4;
  RCC_OscInitStruct.PLL.PLLQ = 4;
  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
  {
    Error_Handler();
  }

  /** Initializes the CPU, AHB and APB buses clocks
  */
  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
                              |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;

  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK)
  {
    Error_Handler();
  }
  HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_PLLCLK, RCC_MCODIV_2);
}

/**
  * @brief USART1 Initialization Function
  * @param None
  * @retval None
  */
static void MX_USART1_UART_Init(void)
{

  /* USER CODE BEGIN USART1_Init 0 */

  /* USER CODE END USART1_Init 0 */

  /* USER CODE BEGIN USART1_Init 1 */

  /* USER CODE END USART1_Init 1 */
  huart1.Instance = USART1;
  huart1.Init.BaudRate = 115200;
  huart1.Init.WordLength = UART_WORDLENGTH_8B;
  huart1.Init.StopBits = UART_STOPBITS_1;
  huart1.Init.Parity = UART_PARITY_NONE;
  huart1.Init.Mode = UART_MODE_TX_RX;
  huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
  huart1.Init.OverSampling = UART_OVERSAMPLING_16;
  if (HAL_UART_Init(&huart1) != HAL_OK)
  {
    Error_Handler();
  }
  /* USER CODE BEGIN USART1_Init 2 */

  /* USER CODE END USART1_Init 2 */

}

/**
  * @brief USART2 Initialization Function
  * @param None
  * @retval None
  */
static void MX_USART2_UART_Init(void)
{

  /* USER CODE BEGIN USART2_Init 0 */

  /* USER CODE END USART2_Init 0 */

  /* USER CODE BEGIN USART2_Init 1 */

  /* USER CODE END USART2_Init 1 */
  huart2.Instance = USART2;
  huart2.Init.BaudRate = 115200;
  huart2.Init.WordLength = UART_WORDLENGTH_8B;
  huart2.Init.StopBits = UART_STOPBITS_1;
  huart2.Init.Parity = UART_PARITY_NONE;
  huart2.Init.Mode = UART_MODE_TX_RX;
  huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE;
  huart2.Init.OverSampling = UART_OVERSAMPLING_16;
  if (HAL_UART_Init(&huart2) != HAL_OK)
  {
    Error_Handler();
  }
  /* USER CODE BEGIN USART2_Init 2 */

  /* USER CODE END USART2_Init 2 */

}

/**
  * @brief GPIO Initialization Function
  * @param None
  * @retval None
  */
static void MX_GPIO_Init(void)
{
  GPIO_InitTypeDef GPIO_InitStruct = {0};
  /* USER CODE BEGIN MX_GPIO_Init_1 */

  /* USER CODE END MX_GPIO_Init_1 */

  /* GPIO Ports Clock Enable */
  __HAL_RCC_GPIOC_CLK_ENABLE();
  __HAL_RCC_GPIOH_CLK_ENABLE();
  __HAL_RCC_GPIOA_CLK_ENABLE();
  __HAL_RCC_GPIOB_CLK_ENABLE();

  /*Configure GPIO pin Output Level */
  HAL_GPIO_WritePin(GPIOB, GPIO_PIN_6, GPIO_PIN_SET);

  /*Configure GPIO pin : PA8 */
  GPIO_InitStruct.Pin = GPIO_PIN_8;
  GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
  GPIO_InitStruct.Pull = GPIO_NOPULL;
  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
  GPIO_InitStruct.Alternate = GPIO_AF0_MCO;
  HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);

  /*Configure GPIO pin : PB6 */
  GPIO_InitStruct.Pin = GPIO_PIN_6;
  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
  GPIO_InitStruct.Pull = GPIO_NOPULL;
  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
  HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);

  /* USER CODE BEGIN MX_GPIO_Init_2 */

  /* USER CODE END MX_GPIO_Init_2 */
}

/* USER CODE BEGIN 4 */

/**
  * @brief  UART IDLE line detected callback
  * @note   This is called from USART2_IRQHandler when IDLE interrupt occurs
  * @retval None
  */
void UART_IDLE_Callback(UART_HandleTypeDef *huart)
{
	if (huart->Instance == USART2) {
		if (huart->RxState != HAL_UART_STATE_BUSY_RX) {
			/* Not in reception state, ignore */
			return;
		}
		/* Calculate how many bytes were actually received */

		/**
		 * RxXferCount is a countdown timer maintained by the HAL library that
		 * decrements with each byte received. Subtracting it from the total
		 * gives you the actual number of bytes that made it into the buffer.
		 */
		rx_length = sizeof(rx_buf) - huart->RxXferCount;
		
		/* Only process if we actually received data */
		if (rx_length > 0) {
			/* Abort the ongoing reception */
			HAL_UART_AbortReceive_IT(&huart2);
			
			/* Signal that data is ready */
			rx_complete = true;
		}
	}
}

/* USER CODE END 4 */

/**
  * @brief  This function is executed in case of error occurrence.
  * @retval None
  */
void Error_Handler(void)
{
  /* USER CODE BEGIN Error_Handler_Debug */
	/* User can add his own implementation to report the HAL error return state */
	__disable_irq();
	while (1) {
	}
  /* USER CODE END Error_Handler_Debug */
}
#ifdef USE_FULL_ASSERT
/**
  * @brief  Reports the name of the source file and the source line number
  *         where the assert_param error has occurred.
  * @param  file: pointer to the source file name
  * @param  line: assert_param error line source number
  * @retval None
  */
void assert_failed(uint8_t *file, uint32_t line)
{
  /* USER CODE BEGIN 6 */
	/* User can add his own implementation to report the file name and line
	   number, ex: printf("Wrong parameters value: file %s on line %d\r\n", file,
	   line) */
  /* USER CODE END 6 */
}
#endif /* USE_FULL_ASSERT */