Add an explicit rf-switch-mode devicetree property for LLCC68 instances, covering no switch handling, TXEN/RXEN complementary GPIO control, and DIO2 single-pin control for PE4259-style RF switches. Preserve the existing default behavior with an auto Kconfig default that only enables complementary GPIO handling when both TXEN and RXEN GPIOs are present.
Resolve the RF switch mode into llcc68_config at build time and validate incompatible devicetree combinations with BUILD_ASSERT checks. Configure optional RXEN GPIO handling for DIO2 single-pin mode and keep DIO2 RF switch control disabled unless that mode is selected.
Replace the old fire-and-forget TX/RX GPIO helper with a result-returning mode-aware RF switch state helper, and apply it across standby, sleep, CAD, TX, RX, continuous wave, infinite preamble, and modem init paths.
Add SetRxDutyCycle support with explicit raw 24-bit LLCC68 period units, plus helpers and a millisecond wrapper for callers that work in time units. Select the RX RF path before issuing the duty-cycle command so RXEN stays valid for duty-cycle listen windows.
Apply the SX126x IQ config register fix after each LoRa packet parameter update so standard and inverted IQ changes take effect.
Reapply TX power settings in LoRa and GFSK async flush paths so a TX profile can differ from the RX/init profile.
Program SetPacketParams as preamble, header type, payload length, CRC type, and IQ type.
The previous order swapped packet fields, which made gateway LoRa TX frames decode as corrupted fixed-length payloads on the CH32 LLCC68 receiver.
Calculate LoRa airtime from the exact LDRO value supplied to SetModulationParams instead of inferring it from symbol time.
Keep transmit_result airtime in microseconds for both LoRa and GFSK, using integer Hz math and 64-bit ceil division to avoid truncation errors.
Reapply modulation parameters during async TX flush so the estimator and the bytes sent to the radio stay in sync, and add a compile-time check for the intended SF7/BW125 implicit 6-byte airtime.
Use a longer preamble and 32-bit detector for the 100 kbps fixed 6-byte GMSK profile.
Read RX payloads from the RxStartBufferPointer returned by GetRxBufferStatus. The previous subtract-by-length adjustment could read the previous FIFO slot once the continuous RX buffer advanced, causing duplicate and missing packet IDs on the gateway.
Add a fixed 6-byte 100 kbps GMSK profile matching the health-band telemetry packet, plus FSK packet-status helpers for RSSI and error checks. Expose instantaneous RSSI reads for CCA and image calibration for 430-440 MHz GFSK bring-up.
crosstyan