64 lines
1.6 KiB
Markdown
64 lines
1.6 KiB
Markdown
## 3.0.1
|
|
|
|
- Support WS2811 bit timing
|
|
|
|
## 3.0.0
|
|
|
|
- Discontinued support for ESP-IDF v4.x
|
|
- Added configuration for user-defined color component format
|
|
|
|
## 2.5.5
|
|
|
|
- Simplified the led_strip component dependency, the time of full build with ESP-IDF v5.3 can now be shorter.
|
|
|
|
## 2.5.4
|
|
|
|
- Inserted extra delay when initialize the SPI LED device, to ensure all LEDs are in the reset state correctly
|
|
|
|
## 2.5.3
|
|
|
|
- Extend reset time (280us) to support WS2812B-V5
|
|
|
|
## 2.5.2
|
|
|
|
- Added API reference doc (api.md)
|
|
|
|
## 2.5.0
|
|
|
|
- Enabled support for IDF4.4 and above
|
|
- with RMT backend only
|
|
- Added API `led_strip_set_pixel_hsv`
|
|
|
|
## 2.4.0
|
|
|
|
- Support configurable SPI mode to control leds
|
|
- recommend enabling DMA when using SPI mode
|
|
|
|
## 2.3.0
|
|
|
|
- Support configurable RMT channel size by setting `mem_block_symbols`
|
|
|
|
## 2.2.0
|
|
|
|
- Support for 4 components RGBW leds (SK6812):
|
|
- in led_strip_config_t new fields
|
|
led_pixel_format, controlling byte format (LED_PIXEL_FORMAT_GRB, LED_PIXEL_FORMAT_GRBW)
|
|
led_model, used to configure bit timing (LED_MODEL_WS2812, LED_MODEL_SK6812)
|
|
- new API led_strip_set_pixel_rgbw
|
|
- new interface type set_pixel_rgbw
|
|
|
|
## 2.1.0
|
|
|
|
- Support DMA feature, which offloads the CPU by a lot when it comes to drive a bunch of LEDs
|
|
- Support various RMT clock sources
|
|
- Acquire and release the power management lock before and after each refresh
|
|
- New driver flag: `invert_out` which can invert the led control signal by hardware
|
|
|
|
## 2.0.0
|
|
|
|
- Reimplemented the driver using the new RMT driver (`driver/rmt_tx.h`)
|
|
|
|
## 1.0.0
|
|
|
|
- Initial driver version, based on the legacy RMT driver (`driver/rmt.h`)
|