crosstyan
2ab5617cf0
Rename the application-owned LLCC68 devicetree compatible to semtech,llcc68-weihua so Zephyr releases with a native semtech,llcc68 binding can coexist with this custom driver module. Use the registered semtech vendor prefix and a project-specific device suffix; DT_DRV_COMPAT maps to semtech_llcc68_weihua.
50 lines
1.3 KiB
YAML
50 lines
1.3 KiB
YAML
# Copyright (c) 2019 Manivannan Sadhasivam
|
|
# Copyright (c) 2020 Andreas Sandberg
|
|
# SPDX-License-Identifier: Apache-2.0
|
|
|
|
description: |
|
|
Semtech LLCC68 radio transceiver used with the Weihua application driver.
|
|
|
|
This compatible intentionally differs from Zephyr's upstream
|
|
semtech,llcc68 binding so the application-owned driver can coexist
|
|
with Zephyr releases that ship a native LLCC68 binding and driver.
|
|
|
|
compatible: "semtech,llcc68-weihua"
|
|
|
|
include: spi-device.yaml
|
|
|
|
properties:
|
|
reset-gpios:
|
|
type: phandle-array
|
|
required: true
|
|
description: |
|
|
GPIO connected to the modem's NRESET signal.
|
|
|
|
This signal is open-drain, active-low as interpreted by the
|
|
modem.
|
|
|
|
busy-gpios:
|
|
type: phandle-array
|
|
required: true
|
|
description: |
|
|
GPIO connected to the modem's BUSY signal.
|
|
|
|
dio1-gpios:
|
|
type: phandle-array
|
|
required: true
|
|
description: |
|
|
GPIO connected to DIO1. This GPIO will be used as a generic
|
|
IRQ line from the chip.
|
|
|
|
tx-enable-gpios:
|
|
type: phandle-array
|
|
description: |
|
|
Antenna switch TX enable GPIO. If set, the driver tracks the
|
|
state of the radio and controls the RF switch.
|
|
|
|
rx-enable-gpios:
|
|
type: phandle-array
|
|
description: |
|
|
Antenna switch RX enable GPIO. If set, the driver tracks the
|
|
state of the radio and controls the RF switch.
|